NEC SV9100 Feature Handbook page 23

Conference (continued)
To drop an outside call from the Conference:
1. Press Hold to place the conference call on hold.
2. Hang up.
* The lines involved in the Conference ring back separately to the telephone.
3. Answer and disconnect the unwanted outside call.
4. To re-establish the Conference, answer the remaining call by pressing Conf after each call is
answered. Press Conf twice when all calls have been answered.
To exit a Conference when all conference members are outside parties without affecting
the other parties:
Multiline Terminal
1. Press Hold key.
2. Dial # 8.
3. Hang up.
Single Line Telephone
1. Hookflash and dial # 8.
2. Hang up.
To Barge-In to Conference Call:
1. Pick up the handset or press Speaker and dial the service code (default = 710).
Page 20 of 60