Safety Precautions - YOKOGAWA IB100 Instruction Manual

4

1.2 Safety precautions

Accidents occurred by wrong usage are
explained by warning symbol marks and
signal words below.
WARNING
• When displayed on product
To protect operators and products from
serious accidents, this symbol is attached
to the place where you need to refer this
instruction manual certainly.
• When displayed in instruction manual
If there is a possibility that operator's life
or body may be dangerous such as an
electric shock accident (at the same time
products may be damaged), notes to
avoid the danger are described.
CAUTION
• When displayed on product
To protect operators and products from
accidents, this symbol is attached to
the place where you need to refer this
instruction manual certainly.
• When displayed in instruction manual
If there is a possibility that a minor injury
accident of operators or damage to
products, notes to avoid the danger are
described.
IM 12B06J09-01E-E
WARNING
Bluetooth communication
• IB100 has a Bluetooth wireless module.
Before using, be sure to confirm whether
IB100 meet the relevant standards such
as radio regulation of the area you use. In
case of violation, there is a possibility of
being punished by law.
• For details on compliance standards,
please refer to chapter 4 "Specifications"
.
WARNING
For associated intrinsically safe type
(Model code: IB100-CB)
• Associated intrinsically safe type IB100
(AIS type IB100) is designed to maintain
the intrinsically safe performance of
explosion protected type (Ex type)
SENCOM sensors. Be sure to use AIS
type IB100 for Ex type SENCOM sensors.
Explosion protected standards complied
with AIS type IB100 depend on model
code. Before using, be sure to confirm
whether AIS type IB100 and Ex type
SENCOM sensors meet the applicable
standards of the area you use.
• AIS type IB100 cannot be used as an
explosion protected barrier. Connection
with intrinsically safe equipment is
possible only when intrinsically safe
equipment is in non-hazardous area.
• Do not take IB100 to hazardous area.
Do not connect to any equipment in
hazardous area.
• Changes and modifications are not
permitted.
• For details on compliance standards,
please refer to chapter 4 "Specifications".
• Before using, be sure to read Appendix 1
"Safety precautions for associated intrinsi-
cally safe type (Model code: IB100-CB)".
CAUTION
This equipment is not intended for use
in residential environments and may not
provide adequate protection to radio
reception in such environments.