Preparation; Installing Batteries - YOKOGAWA IB100 Instruction Manual

2.2 Preparation

Connecting to SA11
No. Name
1 BOX ASSY
2 CABLE ASSY
3 SENCOM Smart Adapter
4 SA11 compatible sensor
5 PC or Tablet PC
6 AA batteries 2 pieces
Connecting to FU20F/FU24F/SC25F
No. Name
1 BOX ASSY
2 CABLE ASSY
3 SENCOM sensor
4 PC
5 AA batteries 2 pieces
Note
• SA11 does not support SPS24 SENCOM PC software. Please use FieldMate.
• FU20F/FU24F/SC25F does not support FieldMate. Please use SPS24 SENCOM PC
software.

2.3 Installing batteries

Remove the battery cover on the back of IB100 and install batteries. After batteries are
installed properly, status LED starts lighting. After a while, status LED stop lighting but it is
ready for operation.
Model name
IB100
WU11-M9-02-CN-S
SA11
e.g. FU20 SA11 compatible type with
variopin and ID chip
e.g. FSA310
Requirement:
- Bluetooth communication is available
- FieldMate R3.04.00 or later is installed
AA alkaline batteries (LR6) or
AA hydrogen nickel batteries (HR6)
Model name
IB100
WU11-M9-02-CN-V
e.g. FU20F
Requirement:
- Bluetooth communication is available
- SPS24 SENCOM PC software is installed
(refer to Appendix 2 for details)
AA alkaline batteries (LR6) or
AA hydrogen nickel batteries (HR6)
9
IM 12B06J09-01E-E