Table of Contents
Advertisement
12. Sleep
The radio has a timer function, which switches the radio to
standby mode after a pre-defined length of time.
Press and hold
• After the defined time the radio switches to standby
mode.
• Press [VOLUME/ENTER/NAVIGATE] to switch the radio
back on.
Note
During the active
timer function (sleep), the backlight can be set
separately - e.g. darker than in normal mode (see 14.5
Backlight)
13. Alarm
The radio has two individually adjustable alarm times.
13.1 Settings
Press and hold
[ ] [ ]
System
Sleep
[ ] [ ]
System
Sleep
10
• Alarm 1 and alarm 2 are configured identically and allow
two separate alarm times to be saved. Select alarm 1
or 2 and then make the following settings by means of
[VOLUME/ENTER/NAVIGATE]:
Mode:
Choose when the alarm is to activate:
Off – Daily – Once – Weekdays – Weekends
Date and time:
If you selected Once, enter the date and time for the
one-off alarm.
Time:
First choose the hour, then the minute at which the alarm
is to activate.
Mode:
Set whether you wish to be woken by an alarm tone (buzz)
or DAB.
Programme:
If you selected DAB, choose which station or podcast
you wish to be woken with. You can choose any of the 30
preset slots or the Last listened.
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Saving:
Confirm this button to complete your alarm settings.
Note
• It is recommended to allow the radio to update the
time automatically. This ensures that the time is
always correct even if there is a separation of power
supply – for example a power cut.
Advertisement
Table of Contents
