Maintenance; Changing The Drill Chuck; Cleaning; Brushes - Sealey SD800.V2 Instructions

4. mAINTENANCE

4.1.

Changing the drill chuck.

to remove the drill chuck open the chuck fully. locate the internal screw and undo turning the screw clockwise (left handed thread),
to stop the chuck from moving, grip the chuck, if tight the chuck key can be used to provide additional leverage. on the sd1000 the
chuck can be held in position with a spanner. to replace the chuck reverse the above process.
4.2.

Cleaning

Keep the drill ventilation slots clean and free from obstructions. If available blow compressed air into the vents to clear any internal
dust (safety goggles must be warn when undertaking this process). Keep the outer case of the drill clean and free from grease.
DO NOT wash with water or use solvents or abrasives.
4.3.

Brushes

the brushes must be changed by an authorised sealey service agent.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORmATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk,
IP32 7Ar
Original Language Version
,
01284 757500
01284 703534
sd800.V2 & sd1000.V2
www.sealey.co.uk
Web
sales@sealey.co.uk
email
Issue no.1 27/07/10