Lincoln Electric POWERTEC i380C ADVANCED Operator's Manual page 19


Press the Right Button [36] to confirm the file
selection.

The display shows the Load Data Menu from a USB
Memory Stick to User Interface.

Use the Right Knob [36] to highlight the data icon
which will be loaded.
Figure 30.

Press the Right Knob [36] to confirm the data
selection.
Figure 31.

To confirm and load the data from a USB Memory
Stick, highlight the Check Mark icon and then press
the Right Knob [36].
Figure 32.

To exit the USB Menu – press the Left Button [37] or
disconnect the USB Memory Stick from the USB
receptacle.
English
Settings and Configuration Menu
To access the Settings and Configuration Menu:

Press the Button [37] or Right Knob [36] to get
access of Welding Parameters Bar.

Use the Right Knob [36] to highlight the icon
"Configuration".

Press the Right Knob [36] to confirm the selection.
Table 8. Configuration Menu
Symbol
Set the Memory Limits
Set the Display Configuration
Set the Brightness Level
Lock / Unlock
Job Mode
Set the Language
Restore Factory Setting
View Software and Hardware Version
Information.
Access to the Configuration Menu
Cooler Menu
Service Menu
Limits – it allows the operator to set the
limits of main welding parameters in
selected job. The Operator is able to adjust
the parameter value within specified limits.
Note: The Limits can be set only for the programs stored
in the user memory.
17
Figure 33.
Description
English