Usb Configuration; Saving Your Settings - NetComm NB3 Instructions

If you are using USB, please follow the next step
- Click on the Bridging tab
- Select usb-0
- Click Add

Saving your settings

Regardless of the changes you make to your NB3 modem, if you want your settings to be
permanent you will need to commit the settings and reboot the modem. To perform this
operation, follow the outlined procedure (also refer to the picture):-
Select the Admin tab.
-
Click on the Commit and Reboot link.
-
Click on the Commit button and wait until the page returns.
-
You can now connect the NB3 into your PC or router.