System Mode Configuration; Verifying Internet Connection - NetComm NB3 Instructions

5. Once complete select the System Mode option from the Home tab followed by
enabling ZIPB (Zero Installation PPPoE Bridge) prior to selecting the Submit button.
6. From the Services tab then IP Filter and set the Security Level to None
7. Move to the Admin tab then Commit and Reboot, click Commit then the Reboot
buttons and wait approximately 1 minute whilst the NB3 reboots.
8. To verify that the NB3 has established an Internet connection simply check that a
green circle is present under the Home page Status column for your WAN Interface.
Page 2 of 3