Electrical Connections; Preliminary Checks - Nice WIDE S Instructions And Warnings For Installation And Use

To unlock the device:
1.
turn the key slot cover
2. insert the key (A) and turn it towards the left or right
29
3. the gate leaf can now be moved manually to the desired
position.
To lock the device:
1.
turn the key (A) back to its initial position
2. remove the key
3.
turn the key slot cover.
14 – ENGLISH
WIDE S
0 °
1 8
A
WIDE M
WIDE L
°
9 0
A
4

ELECTRICAL CONNECTIONS

4 ELECTRICAL CONNECTIONS

4.1 PRELIMINARY CHECKS

f
All electrical connections must be made with the
system disconnected from the mains electricity and
with the back-up battery (if present) disconnected.
a
The connection operations must only be carried out
by qualified personnel.
To make the electrical connections:
1.
unhook the control unit box from its position
2. open the box
30
3. drill through the sections prepared for passing the cables
4.
feed the electrical cables inside the barrier mechanism,
starting from the base and moving towards the control unit
5. feed the power supply cable through the cable clamp and
connect it to the 3-contact terminal with fuse
6. tighten the screw of the cable clamp
31
7. connect the remaining cables, by consulting the wiring dia-
gram in "Figure 32 and 33". For greater convenience, the
terminals are removable.
m
Before closing the cover, program the system (refer
to paragraph "PROGRAMMING").