Technical Data - Krups Espresso Automatic EA84 Series Manual

IFU_KR_EA84_EE_NEW_EST 30/05/13 17:52 Page22
MALFUNCTION
The grinding setting button
is difficult to turn.
The espresso or coffee is
not hot enough.
The coffee is too clear or
not coarse enough.
No coffee is coming out of
the machine.
There is a power cut
during the cycle.
Danger: Only a qualified technician is authorised to perform repairs on the power cord and
the electrical network. If this instruction is not followed, you are at risk of death
due to electric shock! Never use an appliance that is visibly damaged!
Appliance:
Electrical power
supply:
Energy
consumption:
Water tank:
22
CORRECTIVE MEASURES
Only change the grinding setting when in operation.
Increase the temperature of the coffee in the Settings menu.
Heat the cup by rinsing with hot water before starting the prepa-
ration.
Do not use oily, caramelised or aromatised coffees.
Check that the bean tank contains coffee and that it descends
correctly.
Reduce the volume of the preparation, increase the strength of
the preparation.
Turn the grinding setting button to the left for finer coffee
grounds.
Prepare your coffee in two cycles using the two cup function.
An incident has been detected during the preparation.
The appliance is restarted automatically and is ready for a new
cycle.
The appliance restarts automatically when reconnected.

TECHNICAL DATA

Automatic Espresso Coffee grounds
tank:
Series EA84xx
Pump pressure:
220-240V~ / 50 Hz
First use and
storage:
During operation:
1450 W
Dimensions
(H x l x P) :
Weight EA84xx:
1,7 l
250 g
15 bars
indoors, in a dry
place
frost).
376 x 274 x 404 mm
9.5 kg
Under reserve of technical modifications.
(free from