Training Functions; Zoom Function In Track View And Altitude View; Same Track Back Function; Track Found Message - Sigma ROX 10.0 GPS Operating Instructions Manual

Training with the RoX 10.0 gps

Training functions

www.sigmasport.com
5.6 Training functions

5.6.1 Zoom function in Track View and Altitude View

press the and

5.6.2 Same track back function

with the 'same track back' function, the RoX 10.0 gps safely returns you to
your start location.

5.6.3 Track found message

The 'track found message' appears if you ride along a previously loaded track.

5.6.4 Off-track alarm

The 'off-track alarm' helps you stay on route and is triggered if you leave it.

5.6.5 Wrong direction message

The RoX 10.0 gps detects if you are riding in the wrong direction and indicates
this.
If a tour has been incorrectly stored (start and end points mixed up), you can use
the 'Reverse track' function (see section ''5.5.1 Using the short menu to select
training settings'') to directly reverse the tour on the RoX 10.0 gps.
Note
'Reverse track' must be activated before a track is loaded to reverse the track!

5.6.6 Waypoint alarm

The waypoint alarm reminds users that they have reached an interesting
waypoint that was marked in advance.
5.7 Analysis
The analyses for the current tour, stored tours, and total values can be found
under the menu item 'memory'.
ROX 10.0
buttons to select the optimum zoom setting.
ROX 10.0
page 26