Starting Logs; Stopping/Ending Logs; Storing Logs - Sigma ROX 10.0 GPS Operating Instructions Manual

Training with the RoX 10.0 gps
Training
www.sigmasport.com
Functional description of track settings:
1. Reverse track (on/off)
Use this function to reverse the direction of a tour that you have stored. If,
for example, you have downloaded a tour to your RoX 10.0 gps from the
Internet and have switched the start and finish locations, you can directly
reverse the tour on the RoX 10.0 gps. If you do not do this, your device will
indicate that you are riding in the wrong direction.
Note
'Reverse track' must be activated before a track is loaded to reverse the track!
2. same track back (on/off)
Use this function to return along the same track that you have just ridden.
3. Track direction (driving direction/north)
Use this function to define the type of direction indication. Driving direction
means that the route is always in front of you. North means that the track
is always pointing north and the arrow rotates on the display in accordance
with your ride direction. This means that if you are cycling south, the arrow
on the display will point down.

5.5.2 Starting logs

To start logs for your training session, press the
confirmation message 'exercise time started' is displayed and the 'stopwatch
active' icon appears in the 'bikecomputer' view mode.

5.5.3 Stopping/ending logs

To end logs for your training session, press the
message 'exercise time stopped' is displayed and the 'exercise time active' icon
disappears from the 'bikecomputer' view mode.
you can continue the log at any time by pressing the
5.5.4 Storing a log
To zero all values and store the log, press and hold the
seconds.
The tour evaluation data can be found under the menu item 'memory/stored
Tours'.
ROX 10.0
ROX 10.0
button. A brief
START
button. A brief confirmation
STOP
button.
START
button for five
STOP
page 23