Stored Tracks; Start Track; Show Track - Sigma ROX 10.0 GPS Operating Instructions Manual

load track

stored tracks

www.sigmasport.com
6.3 Stored tracks
Note
Information on the memory capacity for tracks and waypoints can be found in
section ''6.1.1 Track data memory''.
Here, you can find your tracks that you have transferred to the RoX 10.0 gps
with the help of sIgmA Data Center.
Data Center enables you to download, modify, and store tracks from other users
or plan your own tracks on an interactive map. These tracks can then be loaded
onto the RoX 10.0 gps. Further information about Data Center can be found in
the Data Center instructions.
After selecting a track by pressing the
−

start track

−

show track

− show altitude profile
− show details
6.3.1 Start track
select 'start track' to cycle the selected track.
once you have selected 'start track' by pressing the
and confirmed your selection by pressing
automatically switches to the training menu in 'Track View' mode. Follow the
route shown on the display.
6.3.2 Show track
select 'show track' to display the route for the selected tour.
ROX 10.0
button, you have four options:
ENTER
and
, the track starts. The display
ENTER
ROX 10.0
buttons
page 29