Set Clock - Philips Xenium X700 Manual

You can use the phone while it is charging. If
the battery is completely flat, the battery
symbol will only reappear after a few minutes
of charging.

Set clock

1. Check that your phone is switched on.
)
Long press if necessary. Enter the PIN
code if required. A PIN code is a 4- to 8-digit
secret code of your SIM card. It is
preconfigured and communicated to you by
your network operator or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
2. On idle screen, press
> General > Time &
Set time/date: Enter the time and date by using
the numeric keypad.
Set format: Select the time (12-hour or 24-hour
clock) and date format by pressing the
navigation keys +, -, <, > and
3. To display time and date on the idle screen, go
to Settings > General
8
,
Menu and go to Settings
date.
,
OK.
> Time & date > Display
time.
Press + or - show the time in a clock
clock) or digits (Digital
confirm.
Display local and international clocks
You can display two clocks on the idle screen, one
showing your local time and one the time of your
destination.
1. Check that you have set your local time and
date.
2. Go to Settings > General
Check that Display time
Digital clock.
3. On the idle screen, press
Settings > General >
clock.
,
Clock status: Press
the international clock.
Local setting/Foreign
repeatedly to select a city. If necessary, press
LOptions
to turn Daylight saving
(Analog
,OK
clock). Press
> Time & date.
is set to Analog clock
,
Menu and go to
Time & date> International
OK to choose to turn on
setting: Press < or >
on or off.
Getting Started
to
or