Table of Contents
Advertisement
X810_En_Book.book Page 9 Monday, March 30, 2009 10:48 AM
You can use the phone while it is charging. If
the battery is completely flat, the battery
symbol will only reappear after a few minutes
of charging.
Set clock
1.
Check that your phone is switched on.
)
Long press
if necessary. Enter the PIN
code if required. A PIN code is a 4- to 8-digit
secret code of your SIM card. It is
preconfigured and communicated to you by
your network operator or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
2. On idle screen, tap on
Menu
and go to
>
General
>
Time &
date.
Set
time/date: Enter the time and date.
Tap on the box to be defined. To enter your
+
-
desired digits, tap
or
repeatedly, or long
+
-
press on
or
until you reach the desired
digits.
Set
format: Select the time (12-hour or 24-hour
clock) and date format by pressing the
Getting Started
navigation keys <, >, +, -, and OK, or tapping the
desired options on the screen.
3. To select how to display the time, go to
Settings
>
General
>
Time & date
Analog
clock: Tap to show the time in a clock.
Digital
clock: Tap to show the time in digits.
Tap
OK
to confirm.
Display local and international clocks
You can display two clocks on the idle screen, one
showing your local time and one the time of your
destination.
1.
Check that you have set your local time and
date.
2. Go to
Tools
>
World
clock.
setting: Tap < or > repeatedly
Local setting/Foreign
to select a city. If necessary, tap
Daylight saving/Daylight saving for foreign city
or off.
Settings
>
Display
time:
Options
to turn
on
9
Advertisement
Table of Contents
