Charge The Battery - Philips Xenium X700 Manual

4. As shown, align the metallic connectors on the
battery and battery slot. Insert the battery
until it is locked.
5. As shown, insert the back cover
until it is locked.
Remove the protective film covering the screen
before using the phone.
Getting Started

Charge the battery

Your phone is powered by a rechargeable battery.
A new battery is partially charged. The battery
symbol indicates the state of the battery. To charge
the battery, plug in the connector as shown below.
Then plug the other end into a power socket.
.
Press it down
During charging, the battery symbol scrolls.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
damage the battery. The only way to turn off
the charger is to unplug it, so it is advisable to
use an easily accessible power socket.
If you do not intend to use your phone for
several days, we recommend that you remove
the battery.
7