Set Clock - Philips X710 User Manual

unblock it, you must request the PUK code from
your operator.
,
3. Press Yes when asked whether to start setup:
On the slot setup screen,
+ or -: Move to a setup item of the same slot.
L: Enter the edit screen or option list.
RBack: Return to the previous menu.
To switch between two setup screens:
On Slot 1 setup screen, press
On Slot 2 setup screen, press RBack.
4. To select the primary SIM,
,
press Next at the end of Slot 2 setup screen;
press < or > to select;
,
press OK to confirm.
Your phone is turned on. The primary SIM card
appears before the secondary SIM card.
If you select No when asked whether to start
setup, default settings apply. To change the
settings of your SIM card slots, go to Settings >
Dual mode > SIM cards ( see "Dual mode" on
page 46).
To swap primary and secondary SIM
cards,
R
• Press Swap SIM on the idle screen.
8
To edit the card information after the
phone is turned on,
• Go to Settings>
To skip the setup screen when you turn on
the phone,
• Go to Settings>

Set clock

,
Next;
1.
2. On idle screen, press
3. To display time and date on the idle screen, go
Display local and international clocks
You can display two clocks on the idle screen, one
showing your local time and one the time of your
destination.
Dual mode
Dual mode
,
Press to select Off.
Check that your phone is switched on.
> General > Time & date.
Set time/date: Enter the time and date by using
the numeric keypad.
Set format: Select the time (12-hour or 24-hour
clock) and date format by pressing the
navigation keys +, -, <, > and
to Settings > General > Display.
Check that Show date and time
> SIM cards.
> Ask when power on.
,
Menu and go to Settings
,
OK.
is set to on.
Getting Started