Midea MDWMINIW Instruction Manual page 2

Please read the main content in the instruction manual for detailed operating
method.
Connected to power supplies
The power supply is 220-240VAC 50 Hz
the specification of the socket is 10 A 250 VAC
The connection of the drain pipe: Put end of the drain hose into a sink or bucket.
Add water into the dishwasher's tank
Note: Before adding water, you need to press power
button to turn on the diswasher
There are two ways to add water into the tank:
Connect inlet hose to the tap or,
1
Open the cap and add water into the dishwasher's
2
tank manually
There are two ways of checking the tank is full of water
1. Before starting:
When the water tank is full, the machine will beep
for 3 seconds.
2. After starting:
If water is not enough,
When the water tank is full the machine will beep for 3 seconds.
Remove the larger residue
Scrape off excess food before placing the dishes in the dishwasher.
QUICK USER GUIDE
Connect the drain pipe with the back pipe of the machine.The
interface is fitted with clamps and tightened with a screwdriver.
or
Fix the drain pipe with
suction cups
light is on;
1
or
2