Service; Roller Removal; Figure 040-1: Feed Board Removal; Figure 040-2: Roller Removal - Miele B 890 Technical Information

B 890/B 990
4

Service

4.1

Roller Removal

1. Tilt the ironing table to its horizontal position; see Section 020-4.1.

Figure 040-1: Feed Board Removal

2. Remove the feed board (Figure 040-1).
3. Remove the hanging rail.
4. Open the ironing cloth at the drawstring end. Complete removal of cloth is
not necessary.

Figure 040-2: Roller Removal

5. Pull off the roller end cap (Figure 040-2, Item 1).
Note:
Adhesive residue may make it difficult to remove the end cap.
6. Remove the retaining screw (T30) and washer (Figure 040-2, Items 2 and
3) from the interior of the roller.
7. Remove the roller from the roller bar.
37
Technical Information