Table of Contents
Advertisement
>
Confirm by pressing
The menu
selected (e.g.
The following settings can be made:
LOF (local oscillator frequency) is the frequency used by the LNB to convert the frequency
received into the so-called 1st Intermediate Frequency, which can then be utilised by the
receiver. So-called universal LNBs utilise 2 LOFs in order to cover the whole frequency
range of 10.7 to 11.8 GHz (low band) and 11.7 to 12.75 GHz (high band). Using the numeric
key pad of your remote control, enter here the LOF frequency corresponding to the low band
of your LNB.
As above - using the numeric key pad of your remote control, enter here the LOF frequency
corresponding to the high band of your LNB.
Use the numeric key pad of your remote control to enter the frequency at which your LNB
switches from low band to high band.
The following points of this menu should only be entered if you want to test a satellite signal
by means of a self-generated satellite (User 1 to 15).
Use the
cast.
Use the
key to enter the appropriate polarisation plane ( orizontal or ertical) on which
the selected programme is broadcast.
The symbol rate is an indication of the volume of data being transmitted per second. A typi-
cal rate might be 27000, indicating that 27000 symbols per second are being transmitted.
Use the
The FEC function adjusts error correction to the requirements of the selected transponder.
Use the OK key to enter the appropriate FEC. This can be
If the FEC rate is not known, use the
This line will indicate the signal strength, provided the details of the transponder have been
entered correctly.
Red bar:
poor reception, digital reception not possible
.
will now be displayed, together with the DiSEqC setting
).
to enter a frequency at which digital programmes are broad-
to enter the appropriate symbol rate.
setting.
17
,
,
,
,
or
.
Advertisement
Table of Contents
