Table of Contents
Advertisement
The following selections can be made in this sub-menu:
5.4.1 Switching DiSEqC on or off
DiSEqC ( igital Satellite
of DiSEqC-compatible components via the antenna connection.
If your external installation features DiSEqC components, you should enable the DiSEqC
control function:
>
When this entry is highlighted, use the
.
5.4.2 Adjusting the Switching Matrix and LNB Properties
The menu reflects the four switching criteria of the DiSEqC control.
Your receiver is pre-programmed to receive ASTRA broadcasts on switch setting A/A, and
EUTELSAT signals on setting B/A of a Multiswitch. Should the switching matrix of your exter-
nal receiving unit be set up differently, or should you wish to receive satellite signals other
than those mentioned, you can adjust the receiver settings as follows:
>
Use the
wish to use for allocation to a satellite (e.g.
appropriate entry.
>
Press the
A list of several satellites will be displayed, from which you can make your selection.
>
Use the
Pressing the
down, while the
pages respectively.
Should the satellite you are looking for not be included in the list, please select one of
the spare settings, which are marked
>
Confirm by pressing the
The highlighted entry will now be inserted in the
viously selected position
In this way, you can continue to customise the
tion in this menu correspond to those of your receiving unit. For those switiching criteria you
do not require you should select the setting
5.4.3 Additional Settings
Now that the switching matrix of your DVB receiver has been adjusted to conform to your
external reception equipment, you should also check on the other settings for your receiving
equipment, and adjust the settings where necessary.
>
Use the
>
Using the
satellite position (1-4) that you wish to adjust resp. check on; mark the entry
in blue.
uipment
ontrol) is a digital signal that can control the functions
keys to select the DiSEqC switch position (1-4) that you
key to confirm.
keys to select the appropriate satellite.
keys will move the marker by one line at a time, up or
key.
keys to mark the entry
keys to move around the field
key to switch the
keys will take you to the previous or following
to
.
16
function
), and highlight the
.
at the pre-
until all the informa-
.
, select the
or
Advertisement
Table of Contents
