Deleting Channels - TechniSat ASTRASTAR AX 1 Operating Instructions Manual

> set the 1st IF of the channel with
ten-key keypad
> set the correct polarisation level (
horizontal) with
> press and
> set the subcarrier frequency of the channel with
or with the ten-key keypad
> press (save)
> and, on request, set a channel position in the range of 241 to
255 using the ten-key keypad or
The table is automatically selected.
> save the channel data on this channel position with
(save) or
> leave the setting with
, or with the
A v A h
= vertical,
or without saving

6.5 Deleting channels

Due to the preprogrammation copy of the automatic tuning
system undesired channels may be saved. These channels can be
=
deleted individually.
> set the channel table with
> set the undesired channel using the ten-key keypad or
,
> press the recessed
The receiver automatically switches to the next higher channel.
13
, or
(delete-key)