Lof Adjustment; Display Language; Deleting All Channels - TechniSat ASTRASTAR AX 1 Operating Instructions Manual

4.2 LOF adjustment

To adapt the ADR receiver to older outdoor equipments you can
modify the factory-adjusted LOF of 9.75 GHz. Small frequency
failures which may occur are compensated by the automatic fine
tuning (AFC) of the ASTRASTAR AX 1.
> call the installation menu (see 4.1)
E3
> call setting "LOF 9750" with
> switch to "LOF 10000" or "ISI_AB" or "ISI_ABC" with
or
> press or repeatedly until "Standby" appears in
the display
Analogously, you can remodify the LOF to 9.75 GHz. Please take
into consideration that you cannot receive all ADR channels with
an ISISAT equipment.

4.3 Display language

You can switch the display language between German, English,
Danish and Swedish.
> call the installation menu (see 4.1)
E2
> call setting "German" with
> switch to the desired language with
or
or
or
> press or
the display
Correspondingly, you can switch the display language again to
German. The messages of the smart card are not affected by this
modification. They always appear in English.

4.4 Deleting all channels

If you want to completely reprogramme your ASTRASTAR AX 1 you
can delete the entire channel memory. Take into consideration that
afterwards you have to programme new channels according to 6
"Programming".
To avoid an unintended deletion of all channels a multiple safety
interrogation is integrated.
> call the installation menu (see 4.1)
E6
> call setting "delete?" with
> switch to "really?" with
> switch to "with RC!" with
> delete the channel table using the recessed delete key
( ) of the remote control
The function can be interrupted before pressing
with or without deleting the channels.
8
repeatedly until "Standby" appears in
or
or
or
(delete)