Table of Contents
Advertisement
English
NOTE
○
Do not use gasoline, thinner, benzene or kerosene as they can melt plastic.
○
Do not use an air gun or similar tool to clean the pre fi lter, fi lter or the appliance itself.
(Fig. 19)
Doing so could push dirt into the appliance and cause malfunction.
2.
Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that they are properly tightened. Should
any of the screws be loose, retighten them immediately. Failure to do so may result in
serious hazard.
3.
Maintenance of the motor
The motor unit winding is the very "heart" of the power tool.
Exercise due care to ensure the winding does not become damaged and/or wet with oil or
water.
NOTE
Regularly idle the motor to clean out dirt and dust.
Damage may result if dirt or dust collects in the motor.
4.
Cleaning of the outside
When the impact driver is stained, wipe with a soft dry cloth or a cloth moistened with soapy
water. Do not use chloric solvents, gasoline or paint thinner, as they melt plastics.
5.
Storage
Store the cordless cleaner in a place in which the temperature is less than 50°C and out of
reach of children.
When storing the appliance in a vertical position, hook the strap to a hanger.
NOTE
○
Do not store in a location where children can easily reach or take out the appliance.
○
Do not store in a damp location or in an area exposed to rainfall.
○
Do not store in direct sunlight or in a location where temperatures may suddenly change
○
Do not store in a location with volatile materials that could ignite or explode.
Pre Filter
Filter
Fig. 19
No!
Air
Pre Filter
14
Advertisement
Chapters
Table of Contents
