Hitachi R 18DSAL Handling Instructions Manual page 12

English
2. Attach the nozzle (Fig. 13)
Depending on the operation, insert the nozzle to the intake port of the appliance. The
appliance can be used without a nozzle.
NOTE
When attaching the nozzle or extension pipe, insert as you twist in the direction indicated
by the arrow. (Fig. 14)
Twist in the direction indicated by the arrow when detaching as well.
Twisting in the opposite direction could result in detaching the dust case from the housing.
Extension Pipe
Nozzle
3. Install the battery (Fig. 15)
As shown in the diagram below, fi rmly insert until a click is heard.
4. Switch on the appliance (Fig. 16)
When the switch is pulled, the appliance and the LED light are both activated. Release the
switch and the appliance and LED light are both shut off .
CAUTION
Do not expose directly your eye to the light by looking into the light.
If your eye is continuously exposed to the light, your eye will be hurt.
Fig. 13
Battery
Firmly insert
Fig. 15
Nozzle and Extension Pipe
Detach
Twist
Direction Insert
LED light
12
Housing
Dust Case
Fig. 14
Switch
Fig. 16