Roubleshooting Uide - GE 26955 User Manual

40-channel 900 mhz call waiting caller id cordless handset and combination corded speakerphone
Table of Contents

Advertisement

T
ROUBLESHOOTING
T
ELEPHONE
Problem
No dial tone
Dial tone is OK,
but can't dial out
Cordless handset does
not ring
You experience static,
noise, or fading in and out
G
UIDE
Solution
Check installation:
— Is the base power cord connected to a working outlet?
— Is the telephone line cord connected to the base unit
and the wall jack?
Connect another phone to the same jack; the problem might
be your wiring or local service.
Is the cordless handset out of range of the base?
Make sure the battery is properly charged (12 hours).
Is the battery pack installed correctly?
Did the handset beep when you pressed the TALK button?
Did the IN USE indicator come on? The battery may need to
be charged.
Place the cordless handset in the cordless handset charger
for at least 20 seconds.
Make sure the TONE/PULSE switch on the base is
correctly set .
Make sure the RINGER switch on the cordless handset is
turned to ON.
Move closer to the base. The handset may be out of range.
You may have too many extension phones on your line. Try
unplugging some phones.
Check for dial tone.
Change channels.
Move closer to base (cordless handset might be out of
range).
Does the base need to be relocated? Make sure base is not
plugged into an outlet with another household appliance.
Charge battery.
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents