Andset; Sound Signals; Roubleshooting Uide - GE Model 21011 User Manual

H S

ANDSET

OUND
Signal
A long warbling tone (with ringer on)
Three short beeps
One short beep (every 7 seconds)
T
ROUBLESHOOTING
T
ELEPHONE
No dial tone
• Check or repeat installation steps.
• Make sure base power cord is connected to a working electrical outlet.
• Make sure the telephone line cord is connected to the base and the
modular phone jack.
• Connect another phone to the same jack; if there is still no dial tone, the
problem might be your wiring or local service.
• The cordless handset may be out of range of the base. Move closer to
the base.
• Make sure the battery is properly charged (12 hours).
• Make sure the battery pack is installed correctly.
• Did the handset beep when you pressed the talk/callback button? The
battery may need to be charged.
• Place handset in charge cradle for at least 20 seconds to reset.
S
IGNALS
G
UIDE
Meaning
Signals an incoming call
Page signal
Low battery warning
53