Fuse Replacement; Mounting Diagram - Chauvet DJ COLORband HEX 9 IRC Quick Reference Manual

COLORband™ HEX 9 IRC QRG

Fuse Replacement

Mounting

Mounting Diagram

Control Panel
Description
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
Before mounting COLORband™ HEX 9 IRC, read the
Use at least two mounting points and one safety cable per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For the
CHAUVET® line of mounting clamps, go to
clamps-main.html.
Safety Cable
(such as CH-05
from CHAUVET®)
Overhead Mounting
Floor Mounting
Button
<MENU>
Exits from the current menu or function
Navigates upwards through the menu list or increases the numeric
<UP>
value when in a function
Navigates downwards through the menu list or decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently selected
<ENTER>
value into the selected function
Possible Mounting Locations
(M12 Size Bolts)
Mounting Bracket
Adjustment Knobs
Function
4
Safety Notes in this QRG.
www.chauvetlighting.com/cables-
Mounting Clamp
(such as CLP-15
from CHAUVET®)
L-Brackets
EN