Canon Paper Deck Unit-B1 Installation Procedure page 7

Installation procedure > Preparing the Host Machine > Preparing the Host Machine for iR ADVANCE 4045/4051 series
7) Temporarily set the right lower cover guide to the position shown in the figure. Holding the
right lower cover guide, open the right lower cover again and release the stopper from the
shaft to open the right lower cover moreover. Then fix the right lower cover guide with the
screw removed at step 5). After finishing the work, hook the stopper to the shaft and close
the right lower cover.
x1
NOTE:
When the host machine is equipping with the cassette pedestal, open the
cassette pedestal right cover before opening the right lower cover.
Installation procedure > Preparing the Host Machine > Preparing the Host Machine for iR ADVANCE 4045/4051 series
8) Install the deck mounting stay with the 5 binding screws (M4x30).
x5
NOTE:
The 5 binding screws (M4x40) are not used.
9) Attach the latch front cover with the binding screw (M4x8).
F-1-13
F-1-14
x1
7
x1
F-1-15
7