Canon Paper Deck Unit-B1 Installation Procedure page 17

Installation procedure > Preparing the Host Machine > Connecting with the Host Machine and Preparing the Paper Deck
16) Remove the blindfold seal at the rear side of the host machine and attach the harness
guide to the place where the seal has been removed. Then clamp the cable as shown in
the figure.
1
iR ADVANCE 4045/4051 series
iR ADVANCE C5051 series
Installation procedure > Preparing the Host Machine > Connecting with the Host Machine and Preparing the Paper Deck
17) Find out the user's needs, and attach the paper size label and open label to the paper
deck.
x1
F-1-46 NOTE:
Perform the following steps 18) and 19) when the deck paper size is A4.
x1
F-1-47
17
F-1-48
17