Canon Paper Deck Unit-B1 Installation Procedure page 12

Installation procedure > Preparing the Host Machine > Preparing the Host Machine for iR ADVANCE C5051 series
11) Temporarily set the right lower cover guide to the position shown in the figure. Holding the
right lower cover guide, open the right lower cover again and release the stopper from the
shaft to open the right lower cover moreover. Then fix the right lower cover guide with the
screw removed at step 5). After finishing the work, hook the stopper to the shaft and close
the right lower cover.
x1
NOTE:
When the host machine is equipping with the cassette pedestal, open the cassette
pedestal right cover before opening the right lower cover.
Installation procedure > Preparing the Host Machine > Preparing the Host Machine for iR ADVANCE C5051 series
12) Install the supplied deck mounting stay with the 5 supplied binding screws (M4x40).
x5
NOTE:
The supplied 5 binding screws (M4x30) are not used.
13) Attach the supplied latch front cover with the supplied binding screw (M4x8).
F-1-26
F-1-27
x1
12
x1
F-1-28
12