Placing Your Thomson Gateway - THOMSON 585 v7 Setup And User Manual

1.2

Placing your Thomson Gateway

Possibilities
You can mount the Thomson Gateway on a wall or simply place it on a desk.
Wall mount
Proceed as follows to mount the Thomson Gateway on a wall or other vertical surface:
1 Take the wall mount leaflet out of the box.
2 Stick the wall mount leaflet on the place where your want to mount your Thomson Gateway.
3 Drill two holes through the marked positions.
4 Fasten two screws in the wall holes. The screws should protrude five millimetres from the surface of the
wall.
5 Attach your Thomson Gateway on the wall using the two mounting slots on the bottom.
If you install the Thomson Gateway onto plasterboard, use dowels to secure the screws. Otherwise
the strain of the cables connected to the Thomson Gateway rear panel connectors could pull the
Thomson Gateway from the wall.
E-DOC-CTC-20080118-0003 v1.0
1 Installation
5