Samsung DVM S ECO BIG Series Service Manual page 28

No. Parts
12 PLATE COOLING
13 TUBE DISCHARGE
Samsung Electronics
Procedure
1) Purge the Coolant first.
2) Separate 2 weld points on plate cooling by
using a welder.
Warning : When removing the
compressor,Heat Exchanger,
and Pipe, purge the Coolant
inside the Compressor com-
pletely and remove the pipe
with a welding flame.
1) Separate 2 weld points by using
a welder. (Tube discharge to oil
separator&compressor)
Disassembly and Reassembly
Remark
3-13