Samsung DVM S ECO BIG Series Service Manual page 25

Disassembly and Reassembly
No. Parts
11 CONTROL BOX
3-10
Procedure
f) pull out the connector wire that's on
Inverter PBA.
g) Remove 2 screws that fixing IGBT with
heatsink,and 2 screws that fixing PBA
case;(using "+" screwdriver or electric
motion driver)
h) Band the handel of the case and take
off the assy inverter PBA.
(Reffer right pic)
Warning : Becareful when take off
inverter pcb ;when reas-
semble should ensure the
silicon grease thin and
even.
Remark
Samsung Electronics