Samsung DVM S ECO BIG Series Service Manual page 22

No. Parts
10 BRACKET MOTOR
11 CONTROL BOX
Samsung Electronics
Procedure
1) Remove 2 screws on the base.
(using "+" screwdriver or electric motion
driver)
1) Pull out all the connector on the pcb
board.
Warning : Make sure the power is
disconnected before work
2) Remove the screw that fix comp power
wire.
(using "+" screw driver or electric motion
driver)
3) Remove the screw that fix comp power
wire.
(using "+" screw driver or electric motion
driver)
Disassembly and Reassembly
Remark
3-7