Snooze Alarm Operation; Brightness Control; Seconds Time Display - THOMSON RR96L Owner's Manual

Other Functions

Snooze Alarm Operation

This operation allows extra sleep time af-
ter the alarm is on. The alarm will be off
by pressing SNOOZE until the snooze pe-
riod is over. Snooze function can be used
repeatedly up to 2 hours. After this, the
alarm will turn off until the next alarm con-
ditions are met. Set the "quiet time" as
follow:
1. Press and hold SNOOZE.
2. Press REV or FWD to set the "quiet"
period (the default time is 9 minutes) from
1 minute to 30 minutes. Release button,
then the "quiet" period is set.

Seconds Time Display

The unit may display in seconds.
1. The radio should be off, and the clock
should be in normal mode.
2. Press or
onds display.
3. Release to return to the hour and
minute display.

Brightness control

You can adjust the backlight by the
BRIGHTNESS button, there are three
modes you may select from:
OFF - Backlight off.
HIGH - Backlight always high.
LOW - Backlight low.
to show sec-
EN
7