Page 2
MAINS CONNECTIONS MAINS OUTLET POWER SUPPLY: 230V ~50Hz Note: Power is fed to the unit even when it is not functioning. To cut the power supply off, the power cable must be unplugged.
ALERTING YOU OF I M P O R T A N T S I D E . R E F E R S E RV I C I N G " D A N G E R O U S...
Page 4
• The use of apparatus in moderate cloth, or a damp chamois climates. leather. Never use solvents. • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the Your THOMSON product is apparatus.
Selecting Play Mode ......14 The Display ........5 Clock Display ........5 Alarm Settings ......15 Wake 1 and Wake 2 Display ..... 5 Setting Sleep Time ......15 Sleep to Radio ........15 Before You Begin ......6 Sleep to CD ........
The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications without prior notice.
TIME ZONE - Slide to select different wake up radio station or CD track. time zone. CD mode - selects repeat 1 / repeat all / DAYLIGHT SAVING TIME - Press to turn shuffle / repeat shuffle in CD mode.
Top view VOLUME - adjusts the volume. SNOOZE - turns off the alarm momentarily. NAP - sets the alarm to sound after a specific period of time. (Alarm tone only) - activates SLEEP function. - change time / radio frequency /...
The Display Wake 1 and Wake 2 Display Clock Display In wake 1 time setting WAKE 1 In clock setting mode. mode. Nap activated. In wake 2 time setting WAKE 2 Sleep activated. mode. In MW radio band. Wake 1 source.
Before You Begin Setting Time Zone Automatic Time Set You may slide the time You do not have to set the clock time as zone selector at the a built-in automatic time set system is bottom of the clock to equipped in this clock powered by 2 X 1,2,3 or 4.
Note: Note: Note: Note: set system that automatically generates Please make sure the the correct clock time once the unit is TURNING KNOB TURNING KNOB TURNING KNOB TURNING KNOB TURNING KNOB position is plugged in. You are not required to set...
2. Press to set the wake time. The time decrements or increments will fol- low by a faster rate when you press and hold either 3. Rotate the TURNING KNOB to the LOCK position to save the wake time setting.
4. Rotate VOLUME to adjust to your desired wake up volume. 5. Press OFF to stop the CD playback. You can select your CD wake up track by the following procedures. 1. In CD mode, while pressing WAKE UP CD TRACK / RADIO, press select your desired CD wake up track.
LOCK after making radio station. changes. 3. Press and hold WAKE UP CD TRACK / RADIO to store the current radio sta- tion as the wake up radio station. will show on the display.
(see “Snooze” section). You cannot adjust the alarm tone with volume. To stop alarm from sounding Press OFF and the alarm will be on again the following day at the same time. Note: Note: Note: Note:...
FM antenna - The power cord acts as 1. Press RADIO/BAND (located on the your FM antenna. It picks up moderate front of the radio) to turn on the radio. to strong radio stations and eliminates 2. Press RADIO/BAND repeatedly to select the need for an external antenna in the desired broadcast band.
5. Press MEMO again to confirm. 3. Press MEMO once and then press RE- 6. If you set the radio station in the AL CALL repeatedly to choose the radio location, it will be the wake up radio station number you want to overwrite.
Selecting Play Mode Listening to Compact Disc 1. Start CD playback. 1. Open the CD compartment. 2. Insert a disc and close the CD compart- 2. Press CD MODE to toggle between dif- ferent play modes. ment door. 3. Press - repeats the current track.
Alarm Settings Sleep to CD Setting Sleep Time In sleep mode, the radio and CD will turn 1. Under sleep mode, press to start off automatically. To set the sleep time, CD playback. simply: 2. CD play mode will be automatically in 1.
For catnaps up to 2 hours without This operation allows extra sleep time disturbing the regular alarm settings, the after the alarm is on. The alarm will be NAP function wakes you up after a short off by pressing SNOOZE until the snooze period of time.
Prior to cleaning the exterior, be sure to • Do not touch the signal surfaces. Hold unplug the power cord from the AC by the edges, or by one edge and the power outlet. Wipe the exterior with a hole.
Need help?
Do you have a question about the RR540CD and is the answer not in the manual?
Questions and answers