Snooze Alarm Operation; Seconds Time Display; Brightness Control - THOMSON RR420CD Owner's Manual

Operating the Clock Radio

Snooze Alarm Operation

This operation allows extra sleep time
after the alarm is on. The alarm will turn
off by pressing SNOOZE until the snooze
period is over. Snooze function can be
used repeatedly up to 2 hours. After this,
the alarm will turn off until the next alarm
conditions are met. Set the "quiet" period
as follow:
1. Press and hold SNOOZE.
2. Press REV or FWD
"quiet" period (the default time is 9 min-
utes) from 1 minute to 30 minutes. Re-
lease the button, then the "quiet" period
is set.

Seconds Time Display

The unit may display in seconds.
1. Press REV
onds display.
2. Release REV
to the hour and minute display.

Brightness control

You can adjust the backlight by adjusting
the BRIGHTNESS switch at the back of
to set the
the unit, there are two modes you may
select from:
High — Stronger Backlight.
Low — Weaker Backlight.
or FWD to show sec-
or FWD to return
EN
9