Table of Contents
Advertisement
22
EN
VOL. +/–
VIDEO/MEMORY
Switch
Speaker
Stop Button (5)
Still Playback:
1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
If still playback continues for more than about 3 minutes, the camcorder's Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorder's power is automatically turned off.
When 4/6 is pressed, the image may not pause immediately while the camcorder stabilises the still image.
Shuttle Search:
1) During playback, turn the SHUTTLE SEARCH Ring clockwise (3) and release for forward or anti-
clockwise (2) and release for reverse search.
2) To resume normal playback, press 4/6.
During playback, turn the SHUTTLE SEARCH Ring clockwise ( 3 ) or anti-clockwise ( 2 ) and hold
it. The search continues as long as you hold the ring. Once you release it, normal playback resumes.
A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
Slow-Motion Playback, Frame-By-Frame Playback, Playback Zoom and
Playback Special Effects
Available only with the remote control (provided) (
Play/Pause
Button (4/6)
Power Switch
Lock Button
SHUTTLE SEARCH
Ring (2/3)
Pauses during playback.
Allows high-speed search in either direction.
VIDEO PLAYBACK
Normal Playback
1
Load a tape (
pg. 13).
2
Set the VIDEO/MEMORY Switch to "VIDEO", then
set the Power Switch to "
the Lock Button located on the switch. To start
playback, press 4/6.
•To stop playback, press 5.
•Turn the SHUTTLE SEARCH Ring anti-clockwise
(2) and release to rewind, or clockwise (3)
and release to fast-forward the tape during Stop
mode.
To Control The Speaker Volume . . .
.... press VOL. + to turn up the volume, or – to turn
down the volume.
NOTES:
If Stop mode continues for 5 minutes when power is supplied
from a battery, the camcorder shuts off automatically. To turn
on again, set the Power Switch to "OFF", then to "
The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (
You can also view the playback picture on the LCD monitor
with it flipped over and pushed against the camera body.
LCD monitor/viewfinder indications:
• When power is supplied from a battery: the "
battery pack remaining power indicator is displayed.
When power is supplied from an AC outlet: "
does not appear.
• During Stop mode, none of the indications are displayed.
When a cable is connected to the AV connector, the
sound is not heard from the speaker.
pg. 63, 64).
" while pressing down
".
pg. 23, 24).
"
"
Advertisement
Chapters
Table of Contents
