Initialising A Memory Card - THOMSON HP 270 User Manual

VIDEO/MEMORY
Switch
MENU Button
SET/SELECT
Button
Display
PROTEC T
DELE E T
DPOF
FORM AT CANCEL
EXECUTE
RETUR N
FO MAT R
FO MAT R – CANCEL
EXECUTE
ERASE AL L
EX ST I NG I F I LE ? S

Initialising A Memory Card

You can initialise a memory card anytime.
After initialising, all files and data stored in the memory
card, including those which have been protected, are
cleared.
1
Power Switch
2
Lock Button
3
4
+, – Button
5
MEMORY Menu
Confirmation
Screen
Set the VIDEO/MEMORY Switch to "MEMORY",
then set the Power Switch to "
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder
fully.
Press MENU. The Menu Screen appears.
Press + or – to select "
SELECT. The MEMORY Menu appears.
Press + or – to select "FORMAT" and press SET/
SELECT. The Confirmation Screen appears.
Press + or – to select "EXECUTE" and press SET/
SELECT. The memory card is initialised. When
initialisation is finished, "NO FILES STORED" or
"NO SOUND FILES" appears.
•To cancel initialisation, press + or – to select
"CANCEL" and press SET/SELECT.
CAUTION:
Do not perform any other operation (such as turning
off the camcorder) during initialisation. Also, be sure
to use the provided AC Power Adapter/Charger, as the
memory card may be corrupted if the battery becomes
exhausted during initialisation. If the memory card
becomes corrupted initialise it.
37
EN
" while pressing
MEMORY" and press SET/