Playback; Basic Playback For Video; Play/Pause Button; Rewind Button [2] - THOMSON VMD10 User Manual

44
EN
Power Zoom Lever (VOL.)
Speaker

Play/Pause Button (4/6)

Power Switch
Lock Button
Rewind Button (2)
Fast-Forward Button (3)
Stop Button (5)

PLAYBACK

1
Load a tape ( pg. 10).
2
Set the Power Switch to "
the Lock Button located on the switch. To start
playback, press 4/6.
•To stop playback, press 5.
•Press 2 to rewind, or 3 to fast-forward the tape
during Stop mode.
To Control The Speaker Volume . . .
.... slide the Power Zoom Lever (VOL.) towards "+" to
turn up the volume, or towards "–" to turn down the
volume.
NOTES:
If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power Switch to
"OFF", then to "
The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (
You can also view the playback picture on the LCD
monitor with it flipped over and retracted.
LCD monitor/viewfinder indications:
• When power is supplied from a battery: the "
battery pack remaining power indicator is displayed.
When power is supplied through the DC cord: "
does not appear.
• During Stop mode, none of the indications are
displayed.

Basic Playback For Video

" while pressing down
".
pg. 58).
"
"