Nellcor OxiMax N-600x Service Manual page 106

Disassembling the Monitor
100
4. Pull the holding clip back from the speaker and lift the speaker out of the top
case.
Connect speaker
wires to J9 connector
5. Remove the speaker by gently releasing the retaining tab and sliding the
speaker assembly from its mounting.
Caution: Avoid using excessive force when pressing the speaker retaining tab.
6. Set aside or discard the original speaker assembly, so it will not be mixed with
its replacement.
Note: Please dispose of the original speaker assembly according to your local
environmental regulations.
Figure 13: Alarm Speaker
Holding Clip