Table of Contents
Advertisement
All specs are measured according to IHF 202 CEA 490-AR-2008 standard. THD is measured using AP AUX 0025 passive filter and AES 17 active filter.
GENERAL SPECIFICATIONS
LINE INPUT, SPEAKER OUT
Continuous output power into 8 ohms
Continuous output power into 4 ohms
Continuous output power into 8 ohms at Bridged mode
THD (20 Hz – 20 kHz)
Signal-to-Noise Ratio
Clipping power (all channels driven)
Clipping power into 8 ohms at Bridged mode
IHF dynamic power (all channels driven)
IHF dynamic power (two channels driven)
IHF dynamic power (Bridged mode, all channels driven)
IHF dynamic power (Bridged mode, two channels driven)
Peak output current
Damping factor
Frequency response
Channel separation
Maximum undistorted input level
Input sensitivity (for 120 W in 8 ohms, maximum volume)
Analog Input audio sense threshold (one channel with signal)
Trigger IN level
Standby power
DIMENSION AND WEIGHT
Gross dimensions (W x H x D)*
Shipping weight
* - Gross dimension includes extended rear panel terminals and excludes installed feet
>120 W (all channels driven)
>130 W (two channels driven)
>135 W (all channels driven)
>230 W (two channels driven)
>200 W (all channels driven)
>320 W (two channels driven)
<0.05 % (1 W to 100 W, 8 ohms and 4 ohms)
>88 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
>130 W (1 kHz 8 ohms 0.1 % THD)
>150 W (1 kHz 4 ohms 0.1 % THD)
>300 W (1 kHz 0.1 % THD - all channels driven)
>400 W (1 kHz 0.1 % THD - two channels driven)
8 ohms: 125 W
4 ohms: 200 W
2 ohms: 180 W
8 ohms: 145 W
4 ohms: 260 W
2 ohms: 300 W
8 ohms: 440 W
4 ohms: 350 W
8 ohms: 480 W
4 ohms: 380 W
>20 A (1 ohm, 1 ms)
>110 (ref. 8 ohms, 20 Hz to 6.5 kHz)
±0.5 dB (20 Hz - 20 kHz)
>70 dB (1 kHz)
>65 dB (10 kHz)
2900 mV
1150 mV
3 ± 0.5 mVrms (ref. 100 Hz - 10 kHz)
3 - 30 Vdc
0.5W
483 x 45 x 435 mm
19 1/16 x 1 13/16 x 17 3/16 inches
10 kg (22 lbs)
SPECIFICATIONS
15
Advertisement
Table of Contents
