Audio Connections - THOMSON Scenium DTH4500 User Manual

DTH4500-GB 7/09/00 13:33
A
udio connections
Digital audio output
According to the audio devices connected to the digital output of this player (coaxial or optical),
select one of these options.
• See also the Audio connection pages 12-15.
1 If a disc is playing, press
2 Call the "MAIN MENU" with the
3 Select "Audio Options"; press key number
4 Select the menu items with the number 1,
3 numeric keys and set with the
5 To exit "MAIN MENU", press
Available Digital Decoder
CONNECTIONS:
dubbing*: DVDs to DAT or MD
Dolby Digital decoder
MPEG2 decoder
Dolby Digital + MPEG2 decoder
(older) D/A -converter**
nothing connected
DTS decoder
Caution for the optical / coaxial digital audio output connector:
• When connecting an amplifier (with an optical/coaxial digital input connector) which does not
contain the Dolby Digital decoder or DTS decoder, be sure to select:
- "Dolby Digital" = PCM
- "DTS" = Off
of the initial setting "Digital Audio Out". (See above.)
Do not use ...
the "Digital Audio Out" jacks to connect to an equipment other than a Dolby Digital, DTS,
or MPEG 2 receiver or a suitable decoder. Such a connection can create a high level of noise that
may be harmful to your ears, and could damage headphones or speakers. Older digital
equipment, some of which are not fully compliant with IEC 958, are likely to cause this problem.
If you encounter this problem, use the "digital audio out" menu (see above) to convert the Dolby
Digital digital audio bitstream output to linear PCM. The same should be applied with the so-called
"optical or coaxial REC.OUT jack" of Dolby Digital decoders, when they are connected to this DVD
player. Since REC.OUT is a 1: 1 copy of the decoder's input, no other equipment should be connected
there.
16
Page 16
STOP (29).
menu
arrows (18, 16).
return
(20) twice.
Dolby Digital MPEG2
menu items 1
PCM
Bitstream
PCM
Bitstream
PCM
without importance
PCM
AUDIO OPTIONS
key (19).
i m
1 Dolby Digital Out
2 MPEG-2 Digital Out
6
(24).
3 DTS
4 Dynamic Compression
5 2x Playback Audio
2 and
6 Speakers
RETURN
DTS
2 3
* If the DVD disc contains an audio
format of higher quality than 48kHz/16bit
PCM Off
(maybe 96kHz/ 24bit), the player has to
PCM Off convert into a format compatible with
DAT or MD.
Bitstream Off
** In this case you do not hear the highest
Bitstream Off
sound quality possibly recorded on the
PCM Off
disc (via the AUDIO OUT analog output
neither).
Off
PCM On
C C B B PCM
PCM
Off
On
On