Video And Audio Connections - THOMSON IB5400GB Owner's Manual

IB5400GB 3/09/01 16:13
V
ideo and Audio connections
Audio System or TV
Digital Audio
Input
Optical Coaxial
Cable* Cable*
OR
PCM/BITSTREAM
* in grey : not provided
If the SCART socket (with S-Video or RGB) is not free.
Connect your DVD player using a special S-Video cable (not provided) for the video connection
and a Cinch cable for audio left and right inputs (provided).
Note: Always connect your DVD player to the other set (tv, AV Amplifier, ...) with only one
video cable - either SCART, S-Video or Video (Cinch).
With a S-Video or Video(cinch) connection, (Not required when using the SCART
connection). Select on your TV set the correct AV input and set the TV screen aspect : 4x3 or
16x9 (see your TV user's manual).
10
Page 10
Audio Inputs
5.1 Audio
Analog Audio
AV
Cable*
R2
R1
Remove the protection cap from the DVD socket and connect the
optical audio digital cable firmly as shown.
Keep the protection cap and always reattach the cap when the
connector is not in use, to keep it dustfree.
Video Inputs
Video S-Video
Composite
AV AV
S-Video
Cable Cable
Cable*
OR
L2 V2
L1 V1
Good Hosiden socket
picture Better picture
(S-Video connection
page 11)
DVD
TV
Scart Input
RGB
Please use an RGB capable
SCART cable (all 21 pins
connected).
Scart Cable*
The VIDEO OUT
SELECT button at
the rear of the device
permits the S-Video
signal to be sent to
OR
the Scart connector
or the Hosiden
connector. If SCART is selected, the S-
Video signal will not be available at
the Hosiden connector. If S-VIDEO is
selected, the S-Video signal will not be
available on the Scart connector.
SCART socket
Best picture
(if RGB is selected in
11
SET UP MENU) (p. )