Picture Output S-Video - THOMSON Scenium DTH4500 User Manual

DTH4500-GB 7/09/00 13:34
P
icture output S-Video
S-Video link between the DVD player and an amplifier
In order to link your DVD player up to an S-Video compatible Home Cinema system, you will need
to enable S-Video output through the Scart and S-Video (Hosiden) sockets, and change the factory
settings of the Scart output of your DVD player from RGB to S-Video, by following steps 1 to 7
below in the Display Options menu.
Connecting the unit
1
- Connect the DVD player (video out) to the
amplifier (video in) via the twin yellow plugs of
the Audio/Video Cinch/Cinch cable supplied with
the DVD player.
Configuring the DVD player to S-Video
- Call up the MAIN MENU with the
2
(19) on the remote control.
3 - Select Display Options by pressing
- Select SCART Output by pressing
4
5 - Select S-Video using the arrow keys
(18, 16).
6 - return
Press
Final connections
7
- Unplug the Cinch-Cinch cable (see Step 1 above)
and connect the DVD player to the amplifier by
means of an S-Video cable (not supplied).
Page 21
menu
7
7
(24).
(20) twice to leave the menus.
TV
S-VIDEO IN
key
DISPLAY OPTIONS
1 Screen Format
2 Still State
(24).
3 On Screen Messages
4 Display Brightness
5 Black Level
6 NTSC disc Output
i m
7 SCART Output
RETURN
TV
S-VIDEO IN
Amplifier
S-VIDEO OUT
S-VIDEO IN
VIDEO IN
1
DVD Player
S-VIDEO OUT
VIDEO OUT
4x3 PS
Auto
On
Auto Dim
Normal
PAL 60Hz
C C B B Video
OK
Amplifier
S-VIDEO OUT
VIDEO IN S-VIDEO IN
7
DVD Player
S-VIDEO OUT
VIDEO OUT
21
GB
GB