Video And Audio Connections - THOMSON DTH500B - annexe 1 Manual

IB 500B GB 21/08/01 11:23
V
ideo and Audio connections
Audio System or TV
Audio Inputs
Digital Audio
Input
Optical
Cable *
OR
PCM/BITSTREAM
* in grey : not provided
If the SCART socket (with S-Video or RGB) is not free.
Connect your DVD player using a special S-Video cable (not provided) for the video connection
and a Cinch cable for audio left and right inputs (provided).
Note: Always connect your DVD player to the other set (tv, AV Amplifier, ...) with only one
video cable - either SCART, S-Video or Video (Cinch).
With a S-Video or Video(cinch) connection, (Not required when using the SCART
connection). Select on your TV set the correct AV input and set the TV screen aspect : 4x3 or
16x9 (see your TV user's manual).
10
Page 10
Audio
Video
Inputs
Input
AV
Coaxial
Cable
Cable*
Good
picture
Remove the protection cap from the DVD socket and connect the
optical audio digital cable firmly as shown.
Keep the protection cap and always reattach the cap when the
connector is not in use, to keep it dustfree.
TV
Video Inputs
S-Video
AV S-Video
Cable Cable * Cable*
OR OR
Hosiden socket
Better picture
(S-Video connection
page 11)
DVD
Scart Input
Please use an RGB capable
SCART cable (all 21 pins
connected).
Scart
The VIDEO OUT SELECT
button at the rear of the device
permits the S-Video signal to
be sent to the Scart connector
or the Hosiden connector. If
SCART is selected, the S-
Video signal will not be
available at the Hosiden
connector. If S-VIDEO is
selected, the S-Video signal
will not be available on the
Scart connector.
SCART socket
Best picture
(if RGB is selected in
SET UP MENU) (p. 11)