Alto Clarke Vision 17E Operator's Manual page 42

CLARKE TECHNOLOGY LIMITED WARRANTY
This ALTO Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under
normal use and service for a period of one year from the date of purchase, when operated and maintained in accordance
with Clarke Technology's Maintenance and Operations instructions.
This brush drive and traverse motors are warranted to be free from defects in materials and workmanship under normal
use and service for one year from the date of purchase, provided the motors are inspected for carbon motor brush wear
at six-month intervals by an authorized Clarke Technology repair station. Failure to comply with the six-month inspection
requirement or failure to replace worn motor brushes identified during the inspection will void the one-year warranty on the
motors. Cost of the six-month inspection and replacement of carbon motor brushes is the responsibility of the purchaser.
In the event of a warranty claim on the motors, proof of inspection and any required motor brush replacement must be
provided.
This warranty is extended only to the original purchaser for use of the product. It does not cover normal wear parts such
as electrical cable, rubber parts, and motor brushes.
Clarke Technoloy's liability under this warranty is limited to repair of the product and/or replacement of parts and is given
to purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN. THERE ARE NO WARRANTIES WHICH
EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO WARRANTIES, INCLUDING BUT NOT LIMITED TO WAR-
RANTY OF MERCHANTABILITY, SHALL BE IMPLIED. A warranty registration card is provided with your Clarke Technology
product. Return the card to assist Clarke Technology in providing the performance you expect from your new floor machine.
If a difficulty develops with the product, you should: a) Contact the nearest authorized Clarke Technology repair location
or contact the Clarke Technology Service Operations Department, 2100 Highway 265, Springdale, Arkansas 72764, for the
nearest authorized Clarke Technology repair location. Only these locations are authorized to make repairs to the product
under this warranty. (b) Return the product to the nearest Clarke Technology repair location. Transportation charges to and
from the repair location must be prepaid by the purchaser. Clarke Technology will repair the product and/or replace any
defective parts with out charge within a reasonable time after reciept of the product.
ALTO U.S. Inc., 2100 Highway 265, Springdale, Arkansas 72764.
CLARKE TECHNOLOGY: POLYDUR
Your new Clarke Technology Vision Automatic Scrubber has polydur Solution and Recovery Tanks. Polydur is a rotationally
molded, medium-density linear polyethylene that won't crack or dent, and withstands most corrosives and temperature
extremes. Clarke Technology backs up your Polydur tanks with a five-year guarantee. If a tank breaks or leaks under
normal use within five years of the date of purchase, it will be replaced free.
CLARKE TECHNOLOGY UNIBODY FRAME
Clarke Technology warranties the frame for the new Vision automatic Scrubbers for a period of three years against defects
CLARKE TECHNOLOGY reserves the right to make changes or improvements
Always use genuine Clarke Technology Parts for repair.
SOLUTION AND RECOVERY TANK
FIVE-YEAR GUARANTEE
THREE-YEAR WARRANTY
to its machine without notice.
CLARKE TECHNOLOGY
2100 Highway 265
Springdale, Arkansas, 72764
®
AUTOMATIC SCRUBBER