Transport, Storage And Packaging; Technical Data - oventrop Multidis SF Installation And Operating Instructions Manual

3 Transport, storage and
packaging
3.1 Transport inspection
Upon receipt, check delivery for any damages caused
during transit and completeness.
Any damage must be reported immediately upon
receipt.
3.2 Storage
The stainless steel distributor/collector "Multidis" must
only be stored under the following conditions:
– Do not store in open air, keep dry and free from
dust.
– Do not expose to aggressive fluids or heat sources.
– Protect from direct sunlight and mechanical agitation.
– Storage temperature: -20 °C up to +60 °C
– Max. relative humidity of air: 95%
3.3 Packaging
Packaging material is to be disposed of in an
environmentally friendly manner.
4

Technical data

4.1 Performance data
See summary, illustr. 1.1
Fluid: Non aggressive fluids (e.g. water and suitable
water and glycol mixtures according to VDI 2035). Not
suitable for steam, oily and aggressive fluids.
!
DANGER
Suitable measures (e.g. safety valves) have to
be taken to ensure that the maximum operating
pressures and maximum and minimum operating
temperatures are not exceeded or undercut.
11