MINOURA Modoru Kikaku Lusso-mM Instruction Manual

This stand is NOT compatible with a bike equipped with a mud guard.
!
Do not use this stand for any other purpose than instructed.

How To Assemble

1
Insert the Rear Tire Holder into the Step-
Bar (no specific direction) and fix it with
four M6x30 Bolts.
Insert the Tire Holder into the Step-Bar,
!
do not attach underneath yet.
3
Joint the Upper Frame to the
Lower Frame, and fix them with
two shorter M6x25 Bolts.
!
Please be advised
the stand may fall
backward at this
moment due to the
imbalance of the
stand at this point.
[Extention Bar]
If your bike has long wheelbase
such as large 29" wheel MTB,
install the optional Extention
Bars between the upper and
lower frames.
This extends the frame length
100mm.
Bike Storage Stand
Required Tools : 4mm Hex Wrench, 10mm Spanner
Flat Wasaher
Spring Washer
M6x30 Bolt
Rear Tire Holder
Upper
Frame
M6x25 Bolt
Flat Washer
Dome Nut
Flat Washer
Lusso-mM
2
Insert the Lower Frame into
the Step-Bar, and fix it with
four M6x30 Bolts.
This is also the same.
!
Insert the frame into the Step-
Bar, do not attach behind it.
Tighten each
Step-Bar
bolt equally and
alternately.
Do not try to tighten
just one bolt firmly.
You may not be able
to screw other bolts.
4
Put the Front Tire
Holder at the top of
the Upper Frame, and
temporarily hold it with
the Knob Bolts.
You will adjust the
positions of the Tire
Guide - A and C in the
next step.
Tire Guide - B
Tire Guide - A
instructions manual
Flat Wasaher
Spring Washer
M6x30 Bolt
Front
Tire
Holder
Tire Guide - C
(ver.1.0 2018/3)
Lower
Frame
Knob Bolt